The Pro-8 ozone generator is the most powerful of this Jenesco line and has an ozone output potential of up to 8000 mgph. That high output gets almost any job done quickly.
The Jenesco Pro-8 ozone air purifier is intended wherever a high output of ozone is necessary to reduce bacteria, odors, mildew and mold.
It is a great choice for auto detailers, fire and water clean up, and mold remediators. It works great for damp basements and crawl spaces. The built-in hour meter is perfect for equipment rental retailers. It can completely deodorize a vehicle in 15 to 20 minutes.
Working with mold
When mildew and mold have reached a severe point in a building, the only thing to do is have the moldy material hauled away. The Pro-8 is a big help during this process and after reconstruction occurs. You can use them in the building to reduce mold attached to surfaces and in the air, an important step since mold spores can sneak into the lungs and sinuses and cause health problems.
Running the Pro-8 overnight before remediation will allow the residents to occupy temporarily to remove furniture and personal items while the mold in the air is at a reduced level. When the debris is gone, the unit can help make safer air for the workers and serves as a last step in the overall clean up process to help insure the space passes the last air quality inspection.
Fire restorers can put upholstered furniture and other large items in a tent to be treated by the Pro-8 ozone generator. The ozone will deeply penetrate the fabric in a short time and eliminate many problems. If the furniture is able to salvaged, this can save the homeowner a lot of money over replacements.
What is ozone?
Ozone is a gas with a very distinct smell, a molecule made up of three oxygen atoms (O3). Ozone is everywhere in nature: at beaches, in the atmosphere, near waterfalls and in the forest. The smell of a spring rain after a thunderstorm comes from the natural creation of ozone. Because ozone is 3000 times more powerful as a disinfectant than chlorine, it can destroy viruses, bacteria, mildew, mold and odors. Because the ozone produced by the Pro-8 is so strong, you won't want to use it in occupied spaces or where pets are present. After treatment, open windows so the remaining ozone can dissipate.
Operation and maintenance
The Hold position on the timer knob allows for continuous operation. You can also select timed sequences ranging from 15 minutes to 12 hours. The ozone adjustment knob allows you to choose an output from 500 to 8000 milligrams per hour. When the time is done, ozone will shut off but the fan stays running to assist the ozone in dissipating and turning back into oxygen. When power is turned off the fan will stop. For the most stubborn odors, you can repeat the treatment.
There are two input filters supplied with the Pro-8 ozone generator. The plates should be cleaned with a simple mix of soap and water when there is a noticeable drop in output. The stainless steel housing is extremely durable for moving the machine from project to project.
- Covers up to 2000 square feet for mold or 10,000 square feet for odors
- 115VAC, 2 amp fused, 120 watts
- 500 to 8000 mgph ozone output
- Timer: time increments from 15 minutes to 12 hours or Hold for continuous use
- Hour meter can register uses for up to 99,999 hours
- 11" x 15" x 10"
- 25 pounds
- Two year warranty*
*Every ozone generator, no matter who makes it, is an electronic device. It will become damaged and the warranty voided if immersed in water or used when humidity is above 60%. You can lower humidity in a room by running a dehumidifier or air conditioner first.
Return policy: Returnable within 30 days of purchase if unit is in a new and unused condition. A $25 cleaning fee may be charged.