Ozone humidifiers are used to humidify ozone before and during ozone insufflations. Humidifying ozone makes it less harsh and easier for the skin to absorb. Humidified ozone is the same strength as non-humidified ozone once the water has had time to saturate. This humidifier comes with tubing and adapters already attached. A stand is included with the 500ml so the jar won't tip over easily.
500ml Ozone Water Bubbler/Humidifiers serve the purpose of making ozone less harsh and producing ozonated water for Ozone Therapy.
Video Transcript
Hey everyone, my name is Colton and today I'll be setting up the water bubbler humidifier combo. The water bubbler humidifier combo is used for making ozonated water and performing humidified insufflations.
Before I begin, you will need your oxygen source and ozone generator ready to continue with the setup. If you still need to set up your oxygen source or ozone generator, please watch our videos on how to set those up first.
For this setup, I'll be using the 500ml water bubbler humidifier combo, but the setup for all the glassware for water will be the same. You'll need the flask, the stem, 3 ft of silicone hose, the ozone destruct system, and the 5 ft section of silicone with the check valve that was included with the ozone generator.
To begin, you want to fill your flask with distilled water or low mineral content water. We'll then place the stem into the flask. And at this point, we can take the 5 ft segment of silicone tubing with the check off connector set that's included with the generator and connect this end that has a fitting to the ozone out port of the generator.
We'll then take the other end of the tube and attach to the top segment of tubing on the stem.
Now, we will take the 3 ft section of tubing and attach one end to the lower connection coming off the stem. Now take the other end of the silicone tubing and attach it to this fitting on the end of the ozone destruct system.
With all these connections attached, your water bubbler is ready to be used. When making ozonated water, you'll have the off on the three-way valve of the ozone destruct system pointed at the fitting that has no tubing attached to it. To make ozonated water, you'll set your oxygen flow rate to 1/8 and power on your ozone generator with its dial set to the highest setting. For 500 ml of water, you'll let this bubble for 15 minutes. After that time has elapsed, you can then power down your ozone generator and turn off your oxygen source. You will also want to disconnect the tubing from the ozone output to help prevent the backflow of water into the generator.
At this point, you can now use your ozonated water.
Thanks for watching. Check out our other YouTube videos for more information, and be sure to follow us on social media. Make sure to hit that like and subscribe button and hit that notification bell for future videos.
Setup Guides
All of Promolife's Ozone Glassware is made with Class A Laboratory Grade Borosilicate Glass.
Looking for replacement parts?
Many people who purchase humidifiers decide to add on an Ozone Destruct System. This allows you to ozonate the water as long as you need to for optimal ozone strength without allowing ozone to flow into the room. If you want one, add it to your cart above.
Wonderful. Allows me to attach a bigger destruct and now I have zero ozone odor while making ozone water. - Anon
I bought a Glass Humidifier recently. I was delighted that it worked perfectly with my machine and gave excellent results to my procedure. Very delighted that you are located near me and that I do not have to order from outside our Country for parts I need in the future. Thank you so very much! - Susan B.
Excellent quality. Extremely well packaged. Fast reliable service. Absolutely meeting my highest expectations in quality, durability and use. - Anon
Frequently Asked Questions
What is the difference between the all-glass 500ml bubbler and the Basic 500ml bubbler?
The all-glass 500ml bubbler has a frosted glass connection where the stem meets the flask. Compared to the silicon stopper on the basic model, there is a lower chance of an incomplete seal, as the glass stem will slide into the flask's mouth, creating a perfect seal due to the stem's weight. Both bubblers will create the necessary seal; however, the all-glass bubbler will require less attention and zero pressure to create the seal.
Are replacement pieces for the 500ml water bubbler avaliable?
Yes. You can find replacement pieces for the 500ml bubbler on our replacement parts page.
What is the 500ml All Glass Ozone Water Bubbler/Humidifier?
The 500ml All Glass Ozone Water Bubbler/Humidifier is designed to humidify ozone gas and produce ozonated water. Humidifying ozone can make it less drying during some ozone insufflations while also allowing users to make ozonated water.
Why would I use a humidifier with ozone therapy?
Ozone humidifiers add moisture to ozone gas before or during insufflations. This can help make the ozone feel less drying and more comfortable during use. Once the water becomes saturated with ozone, the ozone concentration remains the same as non-humidified ozone.
Do I need an ozone destruct system with the 500ml Water Bubbler/Humidifier?
An ozone destruct system is needed for making ozonated water and humidifying insufflations. It allows you to continue ozonating water without excess ozone gas entering the room and can help eliminate ozone odor during operation.
