Hey everyone, my name's Colton and today I'll be showing you how to use our O2Travel oxygen tank regulator. Ideal for travel, the regulator can be used with any Bernzomatic oxygen tank, which can easily be found at local home improvement stores such as Lowe's and Home Depot. Through our research and testing, we found that the oxygen purity is equivalent to the purity of industrial and prescribed oxygen tanks.

To use this regulator, you'll first make sure that the flow rate at the top of the regulator is set to zero. At this point, you'll screw the regulator into the top of the tank. This regulator is attached by rotating it counterclockwise. And as you tighten it, you'll see the pressure needle on the regulator's face jump to pressure. Make sure that even when you see this, you tighten the regulator all the way onto the tank.

At this point, you can set your flow rate to whichever speed you would like to use your ozone equipment.

When you're done using your equipment, you'll want to make sure to take the regulator off of the tank to make sure you don't lose any of the oxygen in the tank. To remove the regulator, make sure your flow rate is set to zero. And you'll slowly unscrew it from the tank. If you go a bit too quick, you may hear a pop, which is totally normal. And once it's off, you're ready for the next time you use it.

Thanks for watching. Check out our other YouTube videos for more information, and be sure to follow us on social media. Make sure to hit that like and subscribe button and hit that notification bell for future videos.