Whole House Fluoride Removal Water Filter Package

Our Price:


Our Whole House Fluoride removal system will help eliminate up to 95% + of Fluoride from your drinking, bathing and shower water.

People are becoming more aware of the dangers of added Fluoride (Hydrofluosilicic Acid) and high concentrations of natural fluoride in drinking water. It is known that the type of Fluoride that is added to public water is a raw untreated hazardous waste from the phosphate fertilizer mining industry. The waste is straight from the pollution scrubber systems of the phosphate mines and is highly contaminated with arsenic, lead and a potpourri of other heavy metals.

We offer you a solution to remove up to 95%+ Fluoride from your drinking water (as long as your fluoride level is 1.5ppm or below). This system will also remove arsenic, lead, chlorine and most heavy metals.

How does the whole house Fluoride removal system work?

We use Bone Char (charred animal bones) as a fluoride removal media. Bone Char has been proven effective to remove fluoride from water. Widely use in Europe, Africa and India, bone char is the only media that works without being affected by water temperature swings and pH. One reason bone char is effective is because Fluoride has an affinity to attract to the bone. Africa and India have very high concentrations of naturally occurring fluoride. But bone char is effective in removing any type of Fluoride.

Removal Specifications for Bone Char:

Bone char is designed to remove fluoride levels as high as 10 ppm to below 0.2 ppm as long as they are sized according to these standards. If you have the normal level of fluoride in municipal water (0.7 - 1.0ppm) we highly recommend a minimum of four 20" filters if your system has a maximum flow of six gallons per minute. If you have more than a 6gpm flow then call us for assistance or use the guide below.

Each 20" filter cartridge contains approximately 6 lbs of bone char.

Size of each housing: 22"L x 7.5" diameter for each Big Blue housing

1" inlet/outlet

We highly recommend a Sediment Prefilter to prevent water pressure from dropping

If you have a high amount of sediment turbidity in your water (usually from old pipes or frequent water line breakage) we highly encourage you to install a sediment pre-filter on your system to avoid your new filter system from clogging and being ineffective. We offer a sediment pre filter in the available options above to eliminate any sediment or dirt debris that may clog your bone char filters. We strongly encourage you to purchase the pre filter if you have the above situation or purchase one locally. Debris can clog the pores of these filters and may reduce the water pressure of your whole house Fluoride removal system. This may result in reduced effectiveness to remove fluoride. Promolife is not responsible if your filters clog soon after you install your fluoride removal water purifier. If you need a sediment prefilter, you can add one here. - KDF Information
GAC Contaminate Reduction List (pdf)

What You Get

The price reflects four 20" Big Blue Housings and four 20" Bone Char Filters, with shipping already included. If you want more filters and housings or wish to purchase pre or post filters, feel free to contact us.

Finding Flow Rate: Time how long it takes to fill up a one gallon container from an outside faucet. If it takes 15 seconds you have 4 gpm. You may need to use a five gallon bucket to get a more accurate flow rate calculation. This will be your gallons per minute (gpm).

How to determine how many filters you will need: For every 1.5 gpm flow you will need one 20" Big Blue filter.

Fluoride Filter Return Policy:  We are so confident in our fluoride systems that we are offering a money back guarantee. If our filters don't remove or reduce your fluoride we will give you a full refund minus shipping. Four stage point of use and four stage whole house systems are eligible for our money back guarantee.  

Terms of return policy:  Purchaser is responsible for sending the filters back before a refund will be given. Customer must prove that fluoride is not being removed. To do this, contact your local water company for a water report, which will let you know how much fluoride is originally in the water. Then you must have your post-filtered water tested and submit the findings to Promolife along with your local water report. If you do not see an 85% reduction in your fluoride levels you are eligible for our money back offer.

Please note:  Some people may have unusually high levels of fluoride that no filter system can adequately clear. If levels exceed 2ppm we can't guarantee the reduction promised. For high levels we can offer assistance and recommendations but can not offer our money back guarantee. Promolife reserves the right to refuse any fluoride test we believe was falsely performed.

Whole House options are ideal when you don't want point of use systems throughout the house. These systems cover every tap and shower in the home.
You can read our current reviews or write your own below.