Five Stage Reverse Osmosis drinking water systems are ready to install and produce clear, fresh-tasting drinking water.
Do you need an option for clean water? The five stage reverse osmosis drinking water system can produce 99.9% pure contaminate-free water. It's also available with an optional ultraviolet filter, making it a six stage system.
The system comes ready to install, includes all USA-made components and is NSF certified.
How does the reverse osmosis drinking water system work?
Water is forced through a semi-permeable membrane, leaving unwanted substances behind, producing clear, fresh-tasting drinking water. The unwanted substances are flushed down the drain.
Reverse Osmosis uses no chemicals or electricity. It is regarded as one of the most effective technologies known to purify water. Used in conjunction with other filters the outcome is 99.9% pure contaminate-free water. It removes 99% of minerals and can be used in residential homes, in industry and in other applications where mineral-free water is needed. This method is also used to desalinate seawater.
- 10" Sediment Pre-Filter 5 Micron
- 10" KDF Pre-Filter
- 10" Carbon Block Post Filter
- 2"x11" Inline GAC Post Filter
- TCF 50gpd Reverse Osmosis Membrane
- Optional UV Water Sanitizer (six stage unit)
- 100% Water Tested
- Auto shut off valve shuts feed water when tank is full
- Quality calibrated flow restrictor
- 3.2 gallon stainless steel pressure tank - 13.5"H x 11.5" Diameter
- Quick disconnect fittings with ball valve
- Powder coated aluminum bracket
- Long Reach Faucet
- Standard long reach stainless steel lead free faucet
- All quality color coded tubing included
- Self piercing or hex feed water valve
- Drain valve
- Heavy duty, built in check valve
- Inline GAC Post filter
- Installation manual, registration card
- Comes with 50 gpd TFC (Thin Film Composite) Membrane
- 5 YEAR WARRANTY
TANK: 3.2 gallon pressure tank - 15"H x 12" Diameter
Optional: Dual Quality TDS Monitor
With the Dual Quality TDS (Total Dissolved Solids) Monitor you can see the quality of your water going into your filter and the water coming out of it. Advanced microprocessor technology is highly accurate and efficient. Battery is power is saved due to the auto-off function that shuts the unit off after ten minutes of non-use. Dual range from 0-9990 ppm (TDS). Calibrated with a 342 ppm NaCI solution; can easily be recalibrated with a mini screwdriver. Comes with Mur-Lok quick connect T fittings. Timer counts down in days or months and the system installs easily.
Optional Filter Upgrades
The system comes with a GAC post filter but you can choose to replace this with a GAC-Corosex-Calcite Filter or an AP5 Alkaline Energy Filter with Tourmaline. Here is some information.
AP5 Alkaline Energy Crystal Filter with Tourmaline: This filter is designed to make the water from your reverse osmosis system more alkaline, increasing the pH to 10 with an ORP of -500mv. It also emits far infrared energy and creates smaller water droplets for improved hydration. Alkaline water can help the body absorb more minerals and hydrate better. This filter provides premium results and is better than some other alkaline filters at producing results.
GAC-Corosex-Calcite Filter: The filter includes GAC, calcite and Corosex. GAC, or Granulated Activated Carbon, can reduce organic chemicals, bad tastes and odors. Calcite corrects pH to the right level for ensuring a non-corrosive equilibrium in the water. Acidic water contacts the calcite and slowly dissolves it, reducing copper, lead and other plumbing metals and raising the pH. Corosex helps correct acidic conditions, making the water less corrosive by neutralizing free carbon. It can remove or reduce hundreds of organic residues and contaminates, improve clarity and prevent bacterial growth.
Note: All components of this Reverse Osmosis system are made in the USA with a complete 5 year warranty. You will not experience housings that blow or crack under pressure nor fittings that will fail. Filter media will not break down. This is a quality USA made item.