Due to the variety of tanks around the world, Promolife cannot guarantee a regulator will work on a specific tank outside of North America. You will want to contact your supplier to verify which regulator you need for the tank you will purchase. If you don’t know which regulator you need then please review this: Acquiring Oxygen for Ozone Worldwide
Dimensions: G 3/4". This regulator has a built-in adapter that can connect to DIN 477 #9 tanks. These tanks are used in the countries listed below.
The regulator allows you to flow oxygen in flow rates from 1/32 to 4 liters per minute. A regulator is needed for using an oxygen tank. This works well with ozone therapy that requires low flows of oxygen. It is usable in any condition due to the fitting being made of solid brass. It comes with a one year warranty.
PLEASE NOTE: Upon receipt of this item and before using, it is very important that you read the instructions in their entirety.
NOTE: Always verify with your oxygen tank supplier that this regulator will fit.
Important Notes (all users)
The maximum pressure allowed in these regulators is 2600 psi. Many countries in Europe, Australia and a few others will typically fill beyond that (3000+ psi). You will need to discuss this with the oxygen tank supplier to ensure the pressure is well below the max limit to ensure the regulator isn’t compromised and no longer usable. Promolife is not responsible if the regulator is used with a higher pressure and damaged. A new regulator would have to be purchased.
Upon receipt of this item and before using, it is very important that you read the instructions in their entirety.
