Carbon Panel Far Infrared Heaters will allow you to build the right custom-sized sauna for your needs.
Carbon Panel Far Infrared True Wave Heaters are thin, 120V flat panel combination carbon and ceramic heaters. They are composed of very fine carbon fibers mixed with a patented ceramic compound to produce long wave infrared heat from a high output far infrared heater. These combine the best of both carbon and ceramic for a unit that is unmatched. These carbon panels are manufactured in S. Korea.
Notes: For the most effective far infrared therapy, heaters should be placed on the front, back and sides of the body. Additional heaters under the bench are recommended. A certified electrician is recommended to run the electrical for your heater kit to make sure it adheres to building codes.
HK-23-43: 23.5" x 43.5" - 600 watts
HK-14-20: 14" x 20" - 155 watts
HK-19-23: 19" x 23.5" - 265 watts
HK-11-27: 11" x 27.5" - 160 watts
Power Supplies Available
Call for availability. A lead time before shipping may exist.
Insulation is available at $3 per square foot - call us at 888-742-3404 to purchase. Measure each wall, floor and the ceiling to determine the total number of square feet you need.
How do I know how many I need?
You need a total of approximately 17 watts per cubic foot. You can use the formula below to help. You may have to round off a bit because of the four heater types available. Because this can be a bit confusing, feel free to call us at 888-742-3404 or email firstname.lastname@example.org and we will personally help you find out how many of these heaters you'll need for your custom sauna.
L x W x H - Cubic Feet
Cubic Feet x 17 Watts = Total Watts
Now you will have to determine the number of heater panels based on your sauna design. Please contact us if you need assistance.
Extremely Low EMF
Using a state-of-the-art TriField EMF Meter, all of our heaters are tested to ensure safe levels of EMF. Electro Magnetic Fields are measured in milligauss (mG). It is generally accepted that exposure to EMF should not exceed 3 milligauss. The EPA (U.S. Environmental Protection Agency) has proposed a safety standard of 3 mG. Sweden has also set a recommended safety limit of 3 mG. When EMF levels are measured inside the Infrared Sauna all around your seated position, EMF levels are virtually undetectable.
Return policy: Returnable within 30 days providing they are not installed and have no drill holes or indication of installation, with a 15% restock fee plus shipping costs