Categories

Additional Information

Site Information

 Loading... Please wait...

EZ-500T Ozone Water Sanitizer for Coolers and Dispensers

Product Details :

SKU :
EZ-500T
Current Stock:
999
Quantity:
Our Price : $84.95

Product Description

The EZ-500T Water Cooler Sanitizer keeps algae from growing in your water cooler reservoir and is simple to set up.

The 12V, 75mg EZ-500T was made to keep the water in your drinking water system crystal clear.  It runs in cycles of five minutes on, then three hours off, and is set by simply plugging in the unit.  It mounts on the back of the water cooler on the condenser so it doesn't take up room.

It works through micro bubble ozone diffusion and has NSF approved ozone resistant tubing.  There's no bio film build up, no algae growth, no pumps to hook up, no programs or timers to set - nothing but pure, clean water.  It comes with a one year warranty.

Specifications

  • Power: 12V DC, 426 mA (120V AC adapter included)
  • Internal 12V air pump
  • Ozone concentration in reservoir 0.2 mg/L (0.2 PPM) for sanitizing @ 10 min
  • Dimensions: (L) 5" (W) 4.25" (H) 1.5"
  • Weight: 1.06 lb
  • Automatic timer: on 5 min., off 3 hrs.


Parts list

  • One - EZ-500T water cooler sanitizer
  • One - 12V DC power supply
  • One - Check valve
  • One - 3 ft. 5/16 ozone tubing
  • One - Ozone stone


Warranty:  One year
 

Installation instructions

  • From the back of the water cooler (or where applicable), using a 21/64 drill bit or a hole punch for soft stainless steel, make a hole through the reservoir. Note, you should check for clearance of the reservoir sealing system and floats before making a hole in the reservoir. If drilling, always make a small hole first working your way up to the 21/64 bit for soft stainless steel.
  • Attach the supplied stainless steel bulkhead fitting to the reservoir with the O-ring on the inside of reservoir and the threads and nut on the outside.
  • Remove the baffle assembly in the reservoir. Drill a 5/16 hole through the baffle assembly (if needed) or use a 5/16 hole punch. The hole should be near the outside edge of baffle.
  • Cut to size the 5/16 ozone tubing from the bulkhead fitting to the bottom of the reservoir and then push the tubing through the baffle.
  • Attach the ozone stone to the tubing so that it sits just off the bottom of the reservoir and replace the baffle assembly. Now attach the tubing to the bulkhead fitting.
  • Attach the EZ-500T to the upper part of the condenser.
  • Cut the tubing to size from the reservoir bulkhead fitting to EZ-500T bulkhead fitting and attach the tubing to the EZ-500T.
  • Cut the tubing six to 12 inches from the EZ-500T and install the check valve with the arrow pointing to the Reservoir and away from the EZ-500T.
  • Fill the water cooler and connect the EZ-500T to the 12V DC power supply.
  • Very important - If your reservoir is a sealed type with a one way check valve, the check valve will need to be replaced with a non check valve type filter for venting purposes. This filter can be obtained from the manufacture of the water cooler.

 

Warranty Information

Perfect for those who want to reduce algae growth in water cooler reservoirs.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Product Description

The EZ-500T Water Cooler Sanitizer keeps algae from growing in your water cooler reservoir and is simple to set up.

The 12V, 75mg EZ-500T was made to keep the water in your drinking water system crystal clear.  It runs in cycles of five minutes on, then three hours off, and is set by simply plugging in the unit.  It mounts on the back of the water cooler on the condenser so it doesn't take up room.

It works through micro bubble ozone diffusion and has NSF approved ozone resistant tubing.  There's no bio film build up, no algae growth, no pumps to hook up, no programs or timers to set - nothing but pure, clean water.  It comes with a one year warranty.

Specifications

  • Power: 12V DC, 426 mA (120V AC adapter included)
  • Internal 12V air pump
  • Ozone concentration in reservoir 0.2 mg/L (0.2 PPM) for sanitizing @ 10 min
  • Dimensions: (L) 5" (W) 4.25" (H) 1.5"
  • Weight: 1.06 lb
  • Automatic timer: on 5 min., off 3 hrs.


Parts list

  • One - EZ-500T water cooler sanitizer
  • One - 12V DC power supply
  • One - Check valve
  • One - 3 ft. 5/16 ozone tubing
  • One - Ozone stone


Warranty:  One year
 

Installation instructions

  • From the back of the water cooler (or where applicable), using a 21/64 drill bit or a hole punch for soft stainless steel, make a hole through the reservoir. Note, you should check for clearance of the reservoir sealing system and floats before making a hole in the reservoir. If drilling, always make a small hole first working your way up to the 21/64 bit for soft stainless steel.
  • Attach the supplied stainless steel bulkhead fitting to the reservoir with the O-ring on the inside of reservoir and the threads and nut on the outside.
  • Remove the baffle assembly in the reservoir. Drill a 5/16 hole through the baffle assembly (if needed) or use a 5/16 hole punch. The hole should be near the outside edge of baffle.
  • Cut to size the 5/16 ozone tubing from the bulkhead fitting to the bottom of the reservoir and then push the tubing through the baffle.
  • Attach the ozone stone to the tubing so that it sits just off the bottom of the reservoir and replace the baffle assembly. Now attach the tubing to the bulkhead fitting.
  • Attach the EZ-500T to the upper part of the condenser.
  • Cut the tubing to size from the reservoir bulkhead fitting to EZ-500T bulkhead fitting and attach the tubing to the EZ-500T.
  • Cut the tubing six to 12 inches from the EZ-500T and install the check valve with the arrow pointing to the Reservoir and away from the EZ-500T.
  • Fill the water cooler and connect the EZ-500T to the 12V DC power supply.
  • Very important - If your reservoir is a sealed type with a one way check valve, the check valve will need to be replaced with a non check valve type filter for venting purposes. This filter can be obtained from the manufacture of the water cooler.

 

Warranty Information

Perfect for those who want to reduce algae growth in water cooler reservoirs.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

You Recently Viewed...

The items you've recently looked at on our site are shown below.

You haven't looked at any items on our site. When you do, they will appear here.