The IQ 20 will dry the air that goes into your ozone generator, making your unit last longer and work better.

This air dryer has one (1) vertical chamber, which will regenerate all of the desiccant material, even when operated at an excessive flow rate. Ideally this unit should have a 3 hour run time, then a 2 hour dry time. But if you run your pool around 8-10 hours per day, you should be able to run this unit for that period of time before any drying is required. You can set the dry time during the inactive period of your pool pump cycle. There is a desiccant color indicator on this unit that will give you an idea if this dryer is holding too much moisture. It all depends on the humidity and temperature. Dry areas such as Arizona will not require drying as often as an area such as Florida.
 

Specifications

• A vacuum source is required to draw air through the dryer (venturi injector)
• 5 to 20 SCFH (standard cubic feet per hour)
• Regeneration time:  2 hours min. to 3 hours max. heating, plus 1 hour cooling.(Note: Air flow into ozone machine will not be dried during regeneration period)
• Automatic heating with built-in timer. Easy to set manual time of day and regeneration time.
• 120VAC/230VAC 60 hertz, 85VA
• Finish:  Silver, non-gloss powder coat, baked on.
• Wall mountable
• All hardware is stainless steel and aluminum.
• 12” high x 6.635”wide x 3.625” deep.
• 10 pounds (4.5 Kgs.) weight.

Installation

1. Pull the tabs on the timer face to the out (off) position.
2. Set the time of day and length of regeneration time (2-3 hours) by pushing in the tabs. Normally the time is set for early in the morning (12-3 AM or 1-4 AM).
3. Rotate the timer dial to the preset tabs (when pushed in, dryer is in “on” mode). Plug dryer in and regenerate for three hours before connecting to the ozone generator. This will ensure that the dryer chamber is clear of any moisture.
4. Set the “time of day” dial when the dryer is attached to the ozone generator and plugged in. This dryer must be plugged in all the time in order for it to work automatically.