The AirSep Dual Flow NewLife High Pressure Intensity Oxygen Concentrator is perfect for oxygen facials, supplemental oxygen such as EWOT or as an oxygen bar (this is a refurbished unit)
We currently have the Single Flow unit available. The Dual is currently out of stock.

Promolife now has available a High Pressure oxygen concentrator wIth an output of up to 8 LPM @ 20 psi. This unit is also capable of dual flow which mean it has 2 outlets that will allow you, for example, to give your customer an oxygen facial mask treatment and air brush other parts of their body at the same time. High flow and high pressure combine to create a power-efficient 8 LPM (liters per minute) oxygen concentrator in the NewLife Intensity. 

Power consumption is only 410 watts but an outlet pressure of three times (20 psi) that of many other concentrators makes this machine perfect for oxygen facials, oxygen bars, hobby applications and more. Regular oxygen concentrators deliver oxygen at around 7 psi. This is ideal for those who want a higher pressure especially for Air Brush Facial applications, giving you the ability to deliver thicker cosmetic creams to the skin.

This unit is entirly made in the USA with a USA made compressor. This is a refurbished unit.

One person unit includes:
Dual Flow AirSep Oxygen Concentrator
One humidifier bottle
One section 25’ oxygen tubing
Two high pressure nasal cannuals

Two person unit includes:
Dual Flow AirSep Oxygen Concentrator
Two humidifier bottles
Two sections 25’ oxygen tubing
Four high pressure nasal cannuals

NOTE: If using the dual ports at the same time the oxygen flow on each port can be set to whatever flow you wish. If using an air brush while the other port is being used, you must put the flow to "0" before stopping the flow of oxygen throught the brush. This will then increase the flow of oxygen to the other port, so you may need to make an adjustment. The air brush must always be open so there is flow if only 1 port is being used, otherwise if you stop the flow of oxygen through the brush, the machine will build up back pressure and stop. The correct way to stop the flow from the air brush is to either turn the unit to 0 LPM or turn off the machine.

Above you can choose from a variety of accessories to make this machine deliver top performance for your individual needs.  If you have any questions, feel free to call us at 888-742-3404 or contact us.

NOTE: This unit is not for life support and is not designed to be used for medical conditions.

Supplies are limited - please contact us for availability before ordering
 

Specifications

• Oxygen Concentration:* 2–7 lpm: 92% ±3%; 8 lpm: 90% ±3%
• Oxygen Outlet Pressure: 20 psig (138 kPa)
• Dimensions: 27.5 in. high x 16.5 in. wide x 14.5 in. deep (69.9 cm high x 41.9 cm wide x 36.8 cm deep)
• Weight: 54 lb (24.5 kg)
• Power: 120 VAC, 60 Hz, 4.0 amps; 220–240 VAC, 50 Hz, 2.0 amps; 220–240 VAC, 60 Hz, 2.0 amps
• Power Consumption: 410 Watts
• Alarms: High temperature; power failure; high and low pressure; battery test
• Temperature Range: Operational temperature: 41ºF to 95ºF (5ºC to 35 ºC.) (Operating unit outside of this range can affect performance.)
• Storage temperature: -4°F to 140°F (-20°C to 60°C)

*Based on an atmospheric pressure of 14.7 psia (101 kPa) at 70°F (21°C).
*Specifications subject to change without notice.

Note: Before purchasing this unit and it is being used by estheticians for oxygen skin therapy (body, facial) or as an oxygen bar, please check with local and state laws to be sure you can legally use this device in your practice. Promolife is not responsible for providing legal advice pertaining to this.

Return Information: This unit is non-returnable.